Skip to the main content
PeabodyMake a free story

🔧 Workshop, level 11

What the trails say and what they ask. Print it for the class, or put the same questions on the board with a live quiz.

Workshop, level 11

⚙️ Gears and Gear Ratios

How can a small, speedy motor rotate a heavy wheel slowly and with tremendous force?

  • How can a small, speedy motor rotate a heavy wheel slowly and with tremendous force? The answer is frequently a pair of gears, where a gear is a wheel with evenly spaced teeth around its edge, and when two gears mesh, the teeth of one push against the teeth of the other, so rotating one gear rotates its partner in the opposite direction. The gear that does the pushing is called the driver, and the gear it turns is called the driven gear. Because the teeth interlock one at a time, every tooth of the driver that passes the meeting point carries exactly one tooth of the driven gear past that point as well. That simple observation allows engineers to calculate how rapidly each gear in a complicated machine will rotate, merely by counting the teeth on each gear and performing a little division.
  • The gear ratio compares the numbers of teeth on the two gears, so suppose a small driver with 10 teeth meshes with a larger driven gear that has 20 teeth. For the large gear to complete one full rotation, all 20 of its teeth must pass the meeting point, and that requires 20 teeth of the driver, which amounts to two full rotations of the small gear. Consequently, the driver turns twice for every single turn of the driven gear. The gear ratio is calculated by dividing the number of teeth on the driven gear by the number on the driver, so in this example it is 20 divided by 10, which equals 2, and engineers write it as 2 to 1. In practical terms, the large gear rotates at precisely half the speed of the small one, however fast the motor happens to be running.
  • What does the large gear gain in exchange for rotating more slowly? It turns with greater twisting force, which engineers call torque. If we ignore the small losses to friction, a pair of gears exchanges speed for torque, so in a 2 to 1 pair, the driven gear rotates half as fast but with approximately twice the torque. Britannica describes this very example, a driven gear with twice as many teeth as its pinion, which is the name for the smaller gear of a pair. Reverse the arrangement, so that the large gear drives the small one, and you get the opposite exchange: double the speed with half the torque. A bicycle follows the same principle, even though its gears are connected by a chain instead of touching directly. In a low gear for climbing hills, a small front gear drives a large rear gear, so each push on the pedals rotates the wheel less, but with considerably more force.

Try it at home: Shift a bicycle into a low gear and a high gear together, count how many times the back wheel turns for one turn of the pedals, and compare.

Questions and answers

Gears and Gear Ratios

  1. What is a gear? A wheel with teeth around its edge (Gears are toothed wheels whose teeth push on each other when they mesh.)
  2. In a pair of gears, what is the gear that does the pushing called? The driver (The driver pushes, and the gear it turns is the driven gear.)
  3. ⚙️ Each tooth of the driver that passes the meeting point moves how many teeth of the driven gear? Exactly one tooth (The teeth interlock one at a time, so it is always one for one.)
  4. How do you find the gear ratio? Driven gear's teeth divided by the driver's teeth (Dividing the driven gear's teeth by the driver's gives the ratio.)
  5. A 10-tooth driver meshes with a 20-tooth driven gear. How many times does the driver turn for one turn of the driven gear? Twice (The big gear's 20 teeth need two full turns of the 10-tooth driver.)
  6. 🔄 In a 2 to 1 pair, how fast does the driven gear turn compared with the driver? Half as fast (The driver turns twice for each turn of the driven gear.)