Skip to the main content
PeabodyMake a free story

🔧 Workshop, level 12

What the trails say and what they ask. Print it for the class, or put the same questions on the board with a live quiz.

Workshop, level 12

💡 Efficiency: Where Energy Goes

Why does an old-fashioned light bulb become too hot to touch?

  • Why does an old-fashioned light bulb become too hot to touch? The explanation has to do with efficiency, which measures how much of the energy put into a machine comes out in the form you actually want. Efficiency is found by dividing the useful energy that comes out by the total energy that goes in, and it is usually written as a percent. Because energy is never created or destroyed, no machine can deliver more energy than it receives, so no efficiency can ever be greater than 100 percent. The energy that is not useful does not vanish, however; it goes somewhere else, and most of the time it escapes as heat, which warms the machine itself, the air around it, or both of them. Engineers often call this energy wasted, even though it has not disappeared and still exists in another form.
  • An incandescent bulb produces light by heating a thin wire, called a filament, until it glows brightly, much as a piece of metal glows in a blacksmith's fire. According to the U.S. Energy Information Administration, a bulb of this kind turns only about 10 percent of the electricity it uses into light, while the other 90 percent becomes heat. That is an efficiency of roughly 10 percent, which explains why the glass becomes so hot, while an LED, which is short for light-emitting diode, produces light in a completely different way, without heating a wire until it glows. The agency has reported that a typical incandescent bulb gives about 16 lumens of light for each watt of power it uses, while LED bulbs give 80 or more lumens per watt, which is several times as much light from the same amount of electricity. A lumen is a unit that measures how much visible light a source gives off.
  • Engineers search for wasted energy in every design they examine, because reducing it conserves fuel, saves money and prevents delicate parts from overheating. Friction between moving parts turns some of the energy of motion into heat, which is one reason engines need oil and wheels need grease on their bearings. Electric current flowing through wires warms them slightly, so a little energy is lost before it even reaches a machine, and because even a carefully constructed machine has some losses, every real device falls short of 100 percent. When engineers compare competing designs, they often work out the efficiency of each one to see which wastes the least. Suppose a motor takes in 1,000 joules of electrical energy and delivers 800 joules of useful motion. Its efficiency is therefore 800 divided by 1,000, or 80 percent, and the other 200 joules have gone, mostly as heat, into the motor and the surrounding air.

Try it at home: Look at the boxes of two light bulbs together and compare their watts and lumens, then work out which gives more light for each watt.

Questions and answers

Efficiency: Where Energy Goes

  1. What does efficiency measure? How much input comes out as useful energy (Efficiency compares the useful energy out with the total energy in.)
  2. How is efficiency found? Useful energy out divided by total energy in (Divide useful output by total input, then write it as a percent.)
  3. ⚖️ Why can no machine have an efficiency above 100 percent? Energy is never created (A machine cannot deliver more energy than it receives.)
  4. Where does most of a machine's wasted energy usually go? It leaves as heat (Wasted energy still exists; most of the time it warms the machine and the air.)
  5. 💡 According to the EIA, about what share of its electricity does an incandescent bulb turn into light? About 10 percent (The other 90 percent becomes heat, so its efficiency is roughly 10 percent.)
  6. How does an incandescent bulb make light? By heating a filament until it glows (A thin wire called a filament is heated until it glows.)