Skip to the main content
PeabodyMake a free story

🔧 Workshop, level 7

What the trails say and what they ask. Print it for the class, or put the same questions on the board with a live quiz.

Workshop, level 7

🌉 Tension and Compression

How does a bridge hold up a heavy truck?

  • How does a bridge hold up a heavy truck? It handles two kinds of force at the same time. Compression is a force that squeezes or pushes a material together, while tension is a force that stretches or pulls a material apart. Press down on a sponge and you see compression, because the sponge gets shorter, and pull on a rubber band and you see tension, because the band gets longer. Every part of a bridge feels one of these forces, or both at once, so engineers choose materials to match the job. Stone and concrete are strong when they are squeezed, but they crack more easily when they are pulled. Steel cables are very strong when pulled, but a cable cannot push, because it simply bends.
  • The simplest bridge is a beam, which is a long, flat piece resting on a support at each end. When a truck drives onto a beam, the beam bends a tiny bit under the weight. Its top side is squeezed into compression, while its bottom side is stretched into tension. A beam that is too long will sag in the middle, which is why long beam bridges need extra supports underneath them. An arch works in a different way, because its curved shape turns the weight pressing down into a push that travels along the curve to the ground at each end. Almost the whole arch is in compression, so builders long ago were able to make sturdy arches out of stone.
  • A truss is a frame made of many triangles joined together, and the triangles are the secret to its strength. A triangle cannot change its shape unless one of its sides changes length. A square made of sticks can be pushed over into a slanted shape, but a triangle made of the same sticks stays firm. In a truss, some bars are in tension and others are in compression, and together they share the load. A suspension bridge hangs its road from long steel cables that are strung between tall towers. The cables are in tension, while the towers are in compression. Engineers build and test models of each design, compare how well they carry a load, and then improve the parts that fail.

Try it at home: Build a square and a triangle from straws and tape, then press on a corner of each: which one keeps its shape, and why?

Questions and answers

Tension and Compression

  1. A force that squeezes a material together is called… compression (Compression squeezes or pushes a material together.)
  2. ➰ When you stretch a rubber band, it is in… tension (Tension is a force that stretches or pulls a material apart.)
  3. Why do engineers use steel cables to hang a road? They are strong when pulled (A cable can't push, it just bends, but it is very strong in tension.)
  4. 🚚 A truck sits on a beam bridge. Which side of the beam is in tension? The bottom side (The beam bends a little, so its top is squeezed and its bottom is stretched.)
  5. An arch turns the weight pressing down on it into… a push along the curve to the ground (The curve carries the weight down to the ground at each end, as a push.)
  6. 🪨 Why could builders long ago make arches out of stone? Stone is strong when squeezed (An arch is almost all in compression, and stone handles compression well.)