Skip to the main content
PeabodyMake a free story

🌍 Geography, level 10

What the trails say and what they ask. Print it for the class, or put the same questions on the board with a live quiz.

Geography, level 10

🗺️ Reading a Topographic Map

How can a flat sheet of paper show the shape of a mountain?

  • How can a flat sheet of paper show the shape of a mountain? A topographic map does it with contour lines, which the U.S. Geological Survey describes as imaginary lines that follow the surface of the ground at a constant elevation, meaning a constant height above sea level. If you could walk along a single contour line in real life, you would never climb or descend, because every step would stay at exactly the same height. Most USGS topographic maps print their contour lines in brown, and a hilltop usually appears as a set of loops nested inside one another, like the rings of a target, with the smallest loop surrounding the highest ground. Reading these loops lets you imagine the land in three dimensions, even though the paper itself is completely flat.
  • The contour interval is the set difference in elevation between one contour line and the next one, and its value is printed in the margin of each individual map. On a map with a 20-foot interval, for example, the lines might mark 6,000 feet, then 6,020 feet, then 6,040 feet, and so on up the slope. To make counting easier, every fifth line is drawn thicker and labeled with its elevation, and these heavier lines are called index contours. On that same map, the index contours would therefore appear every 100 feet, because five intervals of 20 feet add up to exactly 100 feet. The interval itself varies from one map to another, depending mainly on the type of terrain being shown and on the scale of the map. Experienced map readers always check the margin before they begin to calculate any elevations.
  • The spacing of the lines reveals the slope. Contour lines that are close together represent steep ground, because the land rises a long way over a short horizontal distance, while lines that are far apart indicate gentle or nearly level land. Picture two hikers using a map with a 20-foot interval. In a quarter mile, one hiker crosses ten intervals and climbs 200 feet, while the other crosses only two intervals and climbs just 40 feet, so the first trail is obviously the steeper one. Many USGS maps use a scale of 1:24,000, which means that one inch on the map stands for 24,000 inches on the ground, or 2,000 feet. Hikers, engineers and scientists use these maps to plan routes, choose building sites and understand how the landscape is shaped.

Try it at home: Find a free USGS topographic map of a Colorado park online and look together for its contour interval, an index contour and the steepest slope.

Questions and answers

Reading a Topographic Map

  1. A contour line connects points that have the same… elevation (Every point on one contour line sits at the same height above sea level.)
  2. 🥾 If you walked along one contour line on the ground, what would happen? You would stay at the same height (Every point on one contour line is at the same elevation, so your height never changes.)
  3. 🎯 On a topographic map, what does a hilltop usually look like? Loops nested inside one another (Each loop circles the hill at one height, and the smallest loop marks the top.)
  4. The set difference in elevation between one contour line and the next is called the… contour interval
  5. Where can you find a map's contour interval? Printed in the map's margin
  6. 🔢 What are the thicker, labeled lines that come every fifth line called? Index contours (Every fifth line is drawn heavier and labeled so you can count from it.)