Skip to the main content
PeabodyMake a free story

🔬 Science, level 12

What the trails say and what they ask. Print it for the class, or put the same questions on the board with a live quiz.

Science, level 12

🧲 Electricity and Magnetism

How can spinning a magnet make the electricity that lights your home?

  • How can spinning a magnet make the electricity that lights your home? The story begins in 1820, when the Danish scientist Hans Christian Oersted noticed something that astonished almost everyone who learned about it. When he sent an electric current through a wire, the needle of a compass sitting nearby swung away from north, as if it had been pushed. Until then, most natural philosophers, as scientists were often called in those days, had believed that electricity and magnetism were two completely separate phenomena, entirely unconnected to each other. Oersted's discovery showed that an electric current produces a magnetic field all around the wire that carries it. Others soon found that winding the wire into a coil makes this field stronger, and that wrapping the coil around a piece of iron makes it stronger still. The result is called an electromagnet, a magnet that can be turned on and off just by starting or stopping the current in the wire.
  • The English scientist Michael Faraday, working in a basement laboratory at the Royal Institution in London, turned this discovery into continuous motion. In 1821 he set up a wire carrying a current so that it moved around and around a magnet, an apparatus that is now regarded as the first electric motor. A motor changes electrical energy into the energy of motion, and the motors that spin a ceiling fan or a washing machine still depend on that same push between a current and a magnetic field. Faraday then wondered whether the whole idea could also work the other way around, and in 1831 he showed that it could. When he moved a magnet back and forth through a coil of wire, a current flowed in the coil, even though no battery was connected to it at all. This effect, in which a moving magnet makes a current flow, is called electromagnetic induction.
  • Induction depends completely on change. A magnet resting perfectly still inside a coil produces no current at all; only a changing magnetic field, made by moving either the magnet or the coil, can push electric charges along the wire. A generator puts this idea to work on a very large scale. Inside a generator, magnets and coils of wire turn past one another, driven by a set of spinning blades called a turbine. The blades may be pushed around by steam in a power plant, by falling water at a dam, or by the wind on a hilltop. In a sense, a generator is a motor run backward: a motor turns electrical energy into motion, while a generator turns motion into electrical energy. According to the Royal Institution, almost all of the electric power that people make today still depends on the ideas that Faraday worked out nearly two hundred years ago.

Try it at home: Look at a bike light powered by a wheel dynamo, or a hand-crank flashlight, and talk about how turning it makes electricity.

⭐ The Life of a Star

What happens to a star when it runs low on fuel?

  • What happens to a star when it runs low on fuel? To answer that question, astronomers follow the entire life story of a star, which begins inside a nebula, an enormous cloud of gas and dust drifting through the space between the stars. Over a very long time, gravity gradually pulls the densest clumps of the cloud inward, and as each clump contracts, its center becomes hotter and more tightly packed, until it develops into a protostar, a young star that is still collecting material from the surrounding cloud. Once the temperature at its core climbs high enough, the centers of hydrogen atoms begin colliding with one another and fusing together to form helium. This process, called nuclear fusion, releases a tremendous amount of energy, which streams outward from the core as light and heat. The outward push of that energy balances the inward pull of gravity, and the star settles into a long and very steady stage of its life.
  • Astronomers call this steady stage the main sequence, and it is the longest part of any star's existence. Our Sun is a main sequence star that has been fusing hydrogen into helium for billions of years, and scientists estimate that it is a little less than halfway through its lifetime. A star's mass, meaning the amount of matter it contains, controls almost everything about its future. It might seem reasonable to expect that a heavier star, since it has more fuel available to burn, would last longer than a lighter one, but in fact precisely the opposite is true. The stronger gravity of a massive star squeezes its core much harder, so it consumes its hydrogen far more rapidly and shines far more brightly. A small, dim star, on the other hand, uses its fuel so slowly that it can continue shining for much longer than the Sun ever will, which means that among the stars, the smallest ones last the longest.
  • Eventually, the supply of hydrogen in the core of a star begins to run out. A star like the Sun then swells into a red giant, many times larger than it was before, and its outer layers drift gently away into space, where they form a glowing shell that astronomers call a planetary nebula. What remains behind is the hot, exposed core, known as a white dwarf, which is roughly the size of Earth and slowly cools over an extremely long period of time. A star much more massive than the Sun comes to a very different ending. It fuses heavier and heavier elements in its core until that core is made mostly of iron, and then the core suddenly collapses, triggering a gigantic explosion called a supernova. The core that is left behind becomes either a neutron star, an incredibly dense ball about as wide as a city, or, for the most massive stars of all, a black hole.

Try it at home: On a clear night, look for a reddish star and a bluish-white one together, and talk about how stars differ in color and age.

Questions and answers

Electricity and Magnetism

  1. 🧭 What did Oersted see in 1820 when a current flowed through a wire? A nearby compass needle swung away from north (The compass moved because the current made a magnetic field around the wire.)
  2. What does an electric current produce around the wire carrying it? A magnetic field (Oersted showed that every current has a magnetic field around it.)
  3. What makes an electromagnet stronger? Winding the wire into a coil around iron (A coil concentrates the field, and an iron core strengthens it further.)
  4. What did Faraday build in 1821? The first electric motor (His wire circled steadily around a magnet, which is regarded as the first electric motor.)
  5. 🧲 What is electromagnetic induction? A current made by a changing magnetic field (Faraday found that moving a magnet through a coil produces a current.)
  6. A magnet rests completely still inside a coil of wire. What current flows? No current (Induction needs change, so a still magnet makes no current.)

The Life of a Star

  1. Where does a star's life begin? In a nebula, a cloud of gas and dust (Gravity pulls clumps of a nebula together until a star forms.)
  2. ✨ What does nuclear fusion in a star's core turn hydrogen into? Helium (During the main sequence, hydrogen fuses into helium and releases energy.)
  3. What keeps a main sequence star from collapsing? The outward push of fusion energy (Energy from fusion pushes outward and balances the inward pull of gravity.)
  4. Which stage is the longest part of a star's life? The main sequence (A star spends most of its life steadily fusing hydrogen on the main sequence.)
  5. ☀️ About how far through its lifetime is the Sun? A little less than halfway (Scientists estimate the Sun is a little less than halfway through its life.)
  6. Why does a massive star use its fuel faster than a small star? Its stronger gravity squeezes its core harder (More squeezing makes fusion run faster, so a massive star burns through its fuel.)